Geometric Optimization of an Electrochemical Purification Cell to Prevent Corrosion in CSP Plants During Operation: Paper No. 090008

Kerry Rippy; Liam Witteman; Abigail Monasterial; Patrick Taylor; Judith Vidal

doi:10.1063/5.0169822

Geometric Optimization of an Electrochemical Purification Cell to Prevent Corrosion in CSP Plants During Operation: Paper No. 090008

Kerry Rippy
, Liam Witteman
, Abigail Monasterial
, Patrick Taylor
, Judith Vidal

Building and Industrial Energy Innovation Center

National Renewable Energy Laboratory
Colorado School of Mines
Advanced Energy Systems

Research output: Contribution to conference › Paper

Abstract

When exposed to moisture or oxygen, molten chloride salts produce corrosive impurities which degrade containment alloys. This can significantly decrease the lifetime and increase costs of molten-salt-based systems. To overcome this barrier, we designed and modeled an electrochemical purification cell to remove the corrosive impurity MgOH+. Various reactor architectures, including continuous stirred tank reactors (CSTRs) and plug flow reactors (PFRs) were investigated. Steady-state thermoelectric properties were evaluated using analytical methods, allowing assessment of the effects of structure and design parameters such as flow rate, cell length, and cross-sectional area of molten salt. The results suggest that our design could most effectively increase reliability and decrease costs of molten-chloride-salt-based systems by protecting them during continuous operation using an annular plug flow reactor.

Original language	American English
Number of pages	8
DOIs	https://doi.org/10.1063/5.0169822
State	Published - 2023
Event	SolarPACES: Solar Power and Chemical Energy Systems: 27th International Conference on Concentrating Solar Power and Chemical Energy Systems - Online Duration: 27 Sep 2021 → 1 Oct 2021

Conference

Conference	SolarPACES: Solar Power and Chemical Energy Systems: 27th International Conference on Concentrating Solar Power and Chemical Energy Systems
City	Online
Period	27/09/21 → 1/10/21

Bibliographical note

See NREL/CP-5500-80088 for preprint

NLR Publication Number

NREL/CP-5500-88032

Keywords

analytical modeling
corrosion
CSP
electrochemical purification
molten chloride salts

Access to Document

10.1063/5.0169822

Cite this

Rippy, K., Witteman, L., Monasterial, A., Taylor, P., & Vidal, J. (2023). Geometric Optimization of an Electrochemical Purification Cell to Prevent Corrosion in CSP Plants During Operation: Paper No. 090008. Paper presented at SolarPACES: Solar Power and Chemical Energy Systems: 27th International Conference on Concentrating Solar Power and Chemical Energy Systems, Online. https://doi.org/10.1063/5.0169822

@conference{26a849662130456ca2c63c333f1d3de0,

title = "Geometric Optimization of an Electrochemical Purification Cell to Prevent Corrosion in CSP Plants During Operation: Paper No. 090008",

abstract = "When exposed to moisture or oxygen, molten chloride salts produce corrosive impurities which degrade containment alloys. This can significantly decrease the lifetime and increase costs of molten-salt-based systems. To overcome this barrier, we designed and modeled an electrochemical purification cell to remove the corrosive impurity MgOH+. Various reactor architectures, including continuous stirred tank reactors (CSTRs) and plug flow reactors (PFRs) were investigated. Steady-state thermoelectric properties were evaluated using analytical methods, allowing assessment of the effects of structure and design parameters such as flow rate, cell length, and cross-sectional area of molten salt. The results suggest that our design could most effectively increase reliability and decrease costs of molten-chloride-salt-based systems by protecting them during continuous operation using an annular plug flow reactor.",

keywords = "analytical modeling, corrosion, CSP, electrochemical purification, molten chloride salts",

author = "Kerry Rippy and Liam Witteman and Abigail Monasterial and Patrick Taylor and Judith Vidal",

note = "See NREL/CP-5500-80088 for preprint; SolarPACES: Solar Power and Chemical Energy Systems: 27th International Conference on Concentrating Solar Power and Chemical Energy Systems ; Conference date: 27-09-2021 Through 01-10-2021",

year = "2023",

doi = "10.1063/5.0169822",

language = "American English",

}

Rippy, K, Witteman, L, Monasterial, A, Taylor, P & Vidal, J 2023, 'Geometric Optimization of an Electrochemical Purification Cell to Prevent Corrosion in CSP Plants During Operation: Paper No. 090008', Paper presented at SolarPACES: Solar Power and Chemical Energy Systems: 27th International Conference on Concentrating Solar Power and Chemical Energy Systems, Online, 27/09/21 - 1/10/21. https://doi.org/10.1063/5.0169822

Geometric Optimization of an Electrochemical Purification Cell to Prevent Corrosion in CSP Plants During Operation: Paper No. 090008. / Rippy, Kerry; Witteman, Liam; Monasterial, Abigail et al.
2023. Paper presented at SolarPACES: Solar Power and Chemical Energy Systems: 27th International Conference on Concentrating Solar Power and Chemical Energy Systems, Online.

Research output: Contribution to conference › Paper

TY - CONF

T1 - Geometric Optimization of an Electrochemical Purification Cell to Prevent Corrosion in CSP Plants During Operation

T2 - SolarPACES: Solar Power and Chemical Energy Systems: 27th International Conference on Concentrating Solar Power and Chemical Energy Systems

AU - Rippy, Kerry

AU - Witteman, Liam

AU - Monasterial, Abigail

AU - Taylor, Patrick

AU - Vidal, Judith

N1 - See NREL/CP-5500-80088 for preprint

PY - 2023

Y1 - 2023

N2 - When exposed to moisture or oxygen, molten chloride salts produce corrosive impurities which degrade containment alloys. This can significantly decrease the lifetime and increase costs of molten-salt-based systems. To overcome this barrier, we designed and modeled an electrochemical purification cell to remove the corrosive impurity MgOH+. Various reactor architectures, including continuous stirred tank reactors (CSTRs) and plug flow reactors (PFRs) were investigated. Steady-state thermoelectric properties were evaluated using analytical methods, allowing assessment of the effects of structure and design parameters such as flow rate, cell length, and cross-sectional area of molten salt. The results suggest that our design could most effectively increase reliability and decrease costs of molten-chloride-salt-based systems by protecting them during continuous operation using an annular plug flow reactor.

AB - When exposed to moisture or oxygen, molten chloride salts produce corrosive impurities which degrade containment alloys. This can significantly decrease the lifetime and increase costs of molten-salt-based systems. To overcome this barrier, we designed and modeled an electrochemical purification cell to remove the corrosive impurity MgOH+. Various reactor architectures, including continuous stirred tank reactors (CSTRs) and plug flow reactors (PFRs) were investigated. Steady-state thermoelectric properties were evaluated using analytical methods, allowing assessment of the effects of structure and design parameters such as flow rate, cell length, and cross-sectional area of molten salt. The results suggest that our design could most effectively increase reliability and decrease costs of molten-chloride-salt-based systems by protecting them during continuous operation using an annular plug flow reactor.

KW - analytical modeling

KW - corrosion

KW - CSP

KW - electrochemical purification

KW - molten chloride salts

U2 - 10.1063/5.0169822

DO - 10.1063/5.0169822

M3 - Paper

Y2 - 27 September 2021 through 1 October 2021

ER -

Rippy K, Witteman L, Monasterial A, Taylor P, Vidal J. Geometric Optimization of an Electrochemical Purification Cell to Prevent Corrosion in CSP Plants During Operation: Paper No. 090008. 2023. Paper presented at SolarPACES: Solar Power and Chemical Energy Systems: 27th International Conference on Concentrating Solar Power and Chemical Energy Systems, Online. doi: 10.1063/5.0169822

Geometric Optimization of an Electrochemical Purification Cell to Prevent Corrosion in CSP Plants During Operation: Paper No. 090008

Abstract

Conference

Bibliographical note

NLR Publication Number

Keywords

Access to Document

Fingerprint

Cite this