Skip to main navigation Skip to search Skip to main content

Design Considerations for Phase Change Material-Incorporated Heat Exchangers in Water Heating

  • Colorado School of Mines

Research output: NLRPresentation

Abstract

In recent years, the buildings sector has seen major pushes towards decarbonization through innovations that promote deep electrification. 20% of an average household's energy use comes from water heating, and in the US, over half of all households still use gas water heaters. Of those that use electricity for water heating, the majority use resistive elements rather than heat pump water heaters (HPWHs), the latter of which use 60-70% less energy than the former. However, HPWHs tend to have larger dimensions, preventing current 50-80-gallon tanks on the market from fitting into smaller utility closets sized for 30-40 gallons, such as those found in manufactured housing. Additionally, these smaller HPWHs tend to underperform relative to their larger counterparts. One solution that addresses both space and performance concerns is thermal energy storage, and in particular, phase change materials (PCMs). This study outlines the design process used to produce novel PCM heat exchangers for use in small-volume HPWH tanks, including the identification of design constraints and performance targets relevant to real-world applications. To ensure optimal PCM utilization and tank storage capacity, this works seeks to co-maximize surface area and PCM volume; therefore, this research targets triply periodic minimal surface (TPMS) lattices, which boast enhanced heat transfer capabilities compared to traditional heat exchanger geometries. Starting with a suite of TPMS lattices, we demonstrate a systematic approach for narrowing down feasible designs that comply with identified constraints while meeting PCM performance objectives. Our current results indicate that tuning lattice properties can effectively produce geometries that provide enough energy storage to achieve a 50-gallon capacity out of a 40-gallon HPWH, even when placing the PCM heat exchanger inside the tank. Additionally, we demonstrate successful fabrication of lattices with these tuned properties.
Original languageAmerican English
Number of pages24
DOIs
StatePublished - 2025

Publication series

NamePresented at the 2025 Buildings XVI Conference, 8-11 December 2025, Clearwater Beach, Florida

NLR Publication Number

  • NLR/PR-5500-98176

Keywords

  • heat pump water heaters
  • hermal energy storage
  • HPWH tanks
  • phase change materials

Fingerprint

Dive into the research topics of 'Design Considerations for Phase Change Material-Incorporated Heat Exchangers in Water Heating'. Together they form a unique fingerprint.

Cite this