Abstract
CuIn(1-x)GaxSe2 (CIGS) thin films with Ga ratio, x, ranging from 0.55 to 0.75 were grown on Mo/glass substrates by the selenization of metallic precursors in a H2Se atmosphere. Without a postdeposition annealing step the films were found to have a highly graded composition that became Ga rich near the absorber/Mo interface. A high-temperature annealing step promoted diffusion of Ga to the surfaceregion of the films. These absorbers were used to fabricate glass/Mo/CIGS/CdS/ZnO thin-film solar cells with open-circuit voltages ranging from 0.4 to 0.74 V and efficiencies approaching 12%. Devices, as well as the absorber layers, were characterized.
| Original language | American English |
|---|---|
| Pages (from-to) | 2251-2256 |
| Number of pages | 6 |
| Journal | Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films |
| Volume | 14 |
| Issue number | 4 |
| DOIs | |
| State | Published - 1996 |
Bibliographical note
Work performed by International Solar Electric Technology, Inglewood, California; Colorado State University, Fort Collins, Colorado; and the National Renewable Energy Laboratory, Golden, ColoradoNLR Publication Number
- NREL/JA-21743
Fingerprint
Dive into the research topics of 'Cu(In,Ga)Se2 Thin Films and Solar Cells Prepared by Selenization of Metallic Precursors'. Together they form a unique fingerprint.Cite this
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver